Fix 0x13 Under 2 Min - Fix PC Error ®

Problem with 0x13 Errors ?(Download 0x13 Repair Tools and Fix it Instantly)

Aug-02-2010

0x13 errors are widely being reported, and it must be fix immediately!

Error Code 0x13 is caused by misconfigured system files.

So, from my experience, If you got 0x13 errors(such error number 0x13, blue screen of death,bsod) then there is a 96% chance that your computer has registry problems.

This error should be fixed immediately to prevent further damage to the Windows system..

Free Download: 0x13 Repair Tool
*RegEasy will repair 0x13 and registry data errors on your PC

Your Computer Health Report
	Scan Time:		0x13 Problems: Detected
	Operating System:		System Performance: Not Optimized
	Screen Resolution:		Registry Errors: Detected
	Browser Type:		Danger Level: Very High

0x10	0x20	0x40
0x80	0xD	0xC
0x80000000	0x1234	0x34
0x12	0x12345678	0x78
0x56	0X600	0x1111
0x1117	0x111A	0x111F
0x1114	0x1110	0x1113

1 Comments for "Runtime Error 0x13 ".

Mossel Bay

01:46:36,Aug-04-2010 | #1

Thank you - Nero scout was the culprit - It looks if my NMindexStr problems are solved. I will tell my friends about RegEasy and your good after sale service.
Greetings from South Africa

Free Download RegEasy
*RegEasy Will Repair Errors on Your PC

Some Error Symptoms Like This

The DCB Structure in Windows 3.1

OpenComm() uses BuildCommDCB() to "COM1:9600, E, 7, 1" as the lpszDef parameter to build a default DCB. OpenComm() internally calls SetCommState() to the default DCB to set the initial state of the communications port.

BuildCommDCB() can be used to initialize a DCB to certain settings. the procedure takes a string on the same format as the MS-DOS mode command for its lpszDef parameter. For example, BuildCommDCB("COM1:9600, n, 8, 1", &myDCB) sets myDCB to have a baud rate of 9600, no parity, 8-bit byte size, and 1 stop bit. the string needs to include only the COM port and baud rate; if the other values are absent, they will default. The default settings are even parity, byte size of 7, and 1 stop bit. SetCommState() must be called to put the new DCB settings into effect.

SetCommState() takes a DCB as a parameter, and sets the port according to all the parameters. A DCB can be initialized by calling BuildCommDCB() or the current settings can b...