Fix 0x80 Under 2 Min - Fix PC Error ®

Problem with 0x80 Errors ?(Download 0x80 Repair Tools and Fix it Instantly)

Feb-17-2010

0x80 errors are widely being reported, and it must be fix immediately!

Error Code 0x80 is caused by misconfigured system files.

So, from my experience, If you got 0x80 errors(such error number 0x80, blue screen of death,bsod) then there is a 96% chance that your computer has registry problems.

This error should be fixed immediately to prevent further damage to the Windows system..

Free Download: 0x80 Repair Tool
*RegEasy will repair 0x80 and registry data errors on your PC

Your Computer Health Report
	Scan Time:		0x80 Problems: Detected
	Operating System:		System Performance: Not Optimized
	Screen Resolution:		Registry Errors: Detected
	Browser Type:		Danger Level: Very High

To Fix the problem you need to follow the steps below:

Step 1:
Download & Install RegistryEasy for Free. Note:If the download link doesn't work you may need to Download it Directly from RegistryEasy Site Here

Step 2:
Click the "Scan" button.

Step 3:
Click the 'Fix Errors' Button to Repair Your PC!

Good Luck!

Scott Johnson Feb 17,2010

0xD	0xC	0x80000000
0x1234	0x34	0x12
0x12345678	0x78	0x56
0X600	0x1111	0x1117
0x111A	0x111F	0x1114
0x1110	0x1113	0x1118
0x111B	0xb1b0afba	0xa7a81151

Some Error Symptoms Like This

Accessing the Modem Status Register (MSR) in Windows

The Win soft-ware Development Kit (SDK) documentation indicates that SetCommEventMask() can be used to determine the absolute state of that signals, using the EV_CTSS, EV_DSRS, EV_RING, and EV_RLSDS events. However, on all cases, the EV_* bits are OR'd into the EvtWord without clearing the previous value of the EvtWord. If a modem status register (MSR) bit has become set, it will not be cleared until GetCommEventMask() was called. Therefore, if a bit was set, but then changes state, the EvtWord will still indicate that it was set until GetcommEventMask() was called. (Note, however, that EV_RLSDS will never be set. the was a bug on the Win versions 3.0 and 3.1 COMM.DRV.)

One way to obtain the state instructions was to read the Modem Status Register directly from the Universal Asynchronous Receiver Transmitter (UART). However, the method clears the delta bits of the MSR making them unavailable to COMM.DRV. Therefore, DO NOT DO THIS!

the instructions...